Good Quality for Rare earth magnets to Slovenia Factories

Good Quality for
 Rare earth  magnets to Slovenia Factories

Short Description:

Customized  any size  15 years experience Quality & Reputation concerned Coating : NiCuNi  , Zn , NiCuNi+Sn ,NiCuNi+Cr ,NiCuNi+ Au By air  ( magnet power  shelding package ); By sea ( plastic sack  package )


Product Detail

Product Tags

With our great management, potent technical capability and strict excellent handle procedure, we continue on to provide our customers with reputable top quality, reasonable selling prices and great providers. We purpose at becoming amongst your most trusted partners and earning your satisfaction for Ceramic Fiber , Material , Espirometalicas , Should you be on the lookout forever Quality at a very good price tag and timely delivery. Do speak to us.
Good Quality for Rare earth magnets to Slovenia Factories Detail:

Customized  any size 

15 years experience

Quality & Reputation concerned

Coating : NiCuNi  , Zn , NiCuNi+Sn ,NiCuNi+Cr ,NiCuNi+ Au

By air  ( magnet power  shelding package ); By sea ( plastic sack  package )


Product detail pictures:

Good Quality for
 Rare earth  magnets to Slovenia Factories detail pictures


To be the stage of realizing dreams of our employees! To build a happier, far more united and far more specialist team! To reach a mutual profit of our customers, suppliers, the society and ourselves for Good Quality for Rare earth magnets to Slovenia Factories, The product will supply to all over the world, such as: Swedish , Greek , Slovak Republic , We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.



  • One of our new customers from Malaysia in civil engineering industry came to visit our office, they are interested in our Guardrail bolt and nut, stud bolt, hex head wood screw, hex bolt and wire rope clips. We have a very nice meeting, during the meeting we introduce our advantage products to the customer, and they are very interested in our stud bolts, so we discuss the details about the first order of stud bolts during the meeting, and then this customer confirmed the first order to us at the meeting. And this customer have a great demand in our guardrail bolt and nut in future, both of us believe that we can enjoy more cooperation together in future.
    We think everything will be smoothly and believe we can do long term good business relationship in the furture.

    Shanghai Jian & Mei Industry and Trade Co., Ltd
    Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C, Code:200126
    Tel: 0086-21-33328690-8058
    Fax: 0086-21-68413263
    Web:www.jm-industry.com
    Contact: Mrs.Xarella Huang
    Email: Jminfo@jm-industry.com
    Websit: http://www.jm-industry.com



    I turned my door upside down, bolting the baffle to the other side with two bolts from the damper and one of its angle irons as a support on one side. It’s a little crooked, but works perfectly. The damper draft is so much better this way, and you can see in the glass better with it on the top. You won’t know how much better this is unless you tried it their way for awhile, after which only painters’ solvent will remove the creosote. I cemented a piece of braid below the window for a 1/16 inch slot so the airwash would work a little, but it didn’t work very well the way it came from the factory. Keep a razor blade scraper handy and scrape the window every time I load wood. The original braid is glued in with silicon so it pulls right off, then fits in the channel on the other side with stove cement. Add a couple washers to the latch. The fiberglass blanket is two pieces that are overlong on the sides so they ride up to seal the edges of the fiberboard, isolating the firebox, which forces the air tubes to feed the fire instead of that secondary air escaping right up the chimney. DO NOT REMOVE THIS BLANKET BUT FUSS WITH IT A LOT TO GET IT PLACED RIGHT. Small hands help. It should be completely flat, but curved up an inch on either side to completely seal the air inside the firebox. The back half of mine was folded in half and stuffed in the hole. Without it, you lose the effect of a sealed combustion chamber. This is crucial to the Turbo-flow re-burn working right. The blanket is in two pieces so that you can replace the fiberboard if you break it, since that fiberboard can only be removed if it’s in two pieces. Breaking the fiberboard would take some serious force, but it probably happens when your drunken guests load up the firebox. Fair warning. Oh, and there is a rough side and a more finished side to that blanket. I put the rough side down for easier cleaning. Unlike the instructions, the bricks are glued in, so they can’t be removed to lighten this 300-pound monster. Their instructions suggest firing the stove outside for the initial paint cure, and I recommend burning the Chinese crate it comes in right off the truck in your driveway. Entertain your neighbors! This will melt the brick’s glue so they can be easily removed, that the stove will be lighter to get into your house. I also threw away the electric blower because it was noisy and ineffective. Commenters say that a good wind will overfire the stove, but the airflow from the chimney comes a long way over the fiberboard, so I have yet to see a problem with strong wind, not through lack of fierce winds here, but because my fiberglass blanket is installed properly. Those who removed their fiberglass blanket will suffer from too much downdraft, so if you threw yours away, order a new one from Vogelzang and put it back in. I added a clean-out tee to the bottom of the chimney, with a cap that removes easily for taking out flaked creosote often, at least once a week. The gap between the fiberglass blanket and the top of the stove is a mere inch, so when cold air hits the creosote buildup in the stovepipe, it falls down like rain and will clog it completely and catch on fire. This will roar loudly and turn the pipe cherry red. The sound is a wonder to behold! I lifted up the pipe and dumped baking soda on the burning mess. Doesn’t take much baking soda. The cleanout tee works great. Sometimes gloves are required when it’s hot, but it’s really not a problem now. Too bad they don’t come with a door there, but you can reach in easily with a 6” tee. And I tie a piece of braid around the joint of the cap to eliminate smoke seepage, using a single half hitch, as well as on all visible interior pipe joints. This stove is impossible to shut down, so get a punch or its equivalent to shove up the primary intake hole underneath in front, held sideways by a brick on the floor. The intake is the size of a pencil. Glue some braid to a piece of square metal to shut the air off from the 1X3 inch secondary air intake hole underneath at the rear. Wish they made one, but if wishes were horses, beggars would ride. Now I’m using a leather glove and an old hatchet head. Perfect. This is actually rocket science! And my hat is off to the Vogelzang company motto on the second to last page of their instruction manual, the full quote of John 3:16. How wonderful to see that!

    Write your message here and send it to us

    PRODUCTS CATEGORIES

    WhatsApp Online Chat !